Nightwatch LED Controls and Photo Sensors. Converters, inline voltage regulators for 12v DC LED products. And drivers for marine, RV, auto applications.

	Serving you online since 1997 - Free shipping to APO/FPO destinations - Other shipping as low as $4.95 Advanced search

Product Line: Nightwatch LED Controls; Indoor Wall Plate Sensor

Nightwatch™ LED Controls

12WP7 and 24WP7 Indoor Wall Plate Sensor
Sunset On/Sunrise Off Photo Sensor Switch

These Opto Switches can be used as interior LED security light control devices in schools, banks, offices, warehouses, factories, and in all types of stores. They will turn on lights at specific locations or by type at day's end, and turn them off when the normal lights are turned on at the start of the work day. The Opto Switches will work equally well in and around the home, in guard shacks and control stations. These Opto Switches are not just for exterior landscape lighting control.

The 12WP7 and 24WP7 are 7.0 amp load photo sensors for indoor use only applications that will operate LED light arrays and fixtures. This model has an "override switch" and red LED indicator light when you need the sensor to be non-operational. Sensor operates from low incandescent light level, and gradually increases light volume until full light level is reached at darkness.

The 12WP7 is a 12vdc powered unit. The 24WP7 is a 24vdc powered unit. Wall plate is made of white unbreakable nylon sized for remodeling.

The Indoor Wall-Plate Opto Sensors will fit into standard or re-model type single gang boxes. There is no restriction as to where you can mount them. As long as there is space to install a single gang box, you can install the Indoor Wall-Plate Opto Sensors. Opto Sensor is faced away from direct light sources. Reads ambient light with no obstruction or shadows.

For 24vdc installations: 3-color coded 7" long wire leads

black is input (-) common

red is input (+) 12vdc line; orange is (+) output 12vdc load lead.

Electrical Properties: requires a properly sized transformer.

12WP7 Input Voltage rating: regulated 12vdc (11.5-14.0vdc max)
Current Rating: 7.0 amps (20ma-7.2 amps max)

24WP7 Input Voltage rating: regulated 24vdc (23.5-24.5vdc max)
Current Rating: 7.0 amps (20ma-7.2 amps max)

12WP7 12vdc/7 amp Indoor Wall Plate Sensor	$61.00 ea
24WP7 24vdc/7 amp Indoor Wall Plate Sensor	$63.00 ea

NOTE - Buyer Beware: Use on/for non LED products or other 12/24vdc devices is at the purchaser's own risk. TheLEDLight.Com will not honor any warranty or product defect claim, nor will TheLEDLight.Com be liable to any extent for damages to purchaser's property, equipment, non-LED lighting or other devices.

Return to Nightwatch LED Controls Page

View Cart/Checkout	Privacy Policy		Contact Info
		Secure online shopping - click to verify