Product Line: Nightwatch LED Controls ; Outdoor Wall Plate Sensor
Nightwatch™ LED Controls
12OB13 Outdoor Wall Plate Sensor
Sunset On/Sunrise Off Photo Sensor Switch
|
These Opto Switches can be used as interior LED security light control devices in schools, banks, offices, warehouses, factories, and in all types of stores. They will turn on lights at specific locations or by type at day's end, and turn them off when the normal lights are turned on at the start of the work day. The Opto Switches will work equally well in and around the home, in guard shacks and control stations. These Opto Switches are not just for exterior landscape lighting control. |
 The 12OB13are 13.0 amp load photo sensors for outdoor and indoor use applications that will operate LED light arrays and fixtures. Sensor operates from low incandescent light level, and gradually increases light volume until full light level is reached at darkness.
The 12OB13 is a 12vdc powered unit. Wall plate is made of solid stainless steel with a gasket sized for remodeling.
The Outdoor Wall-Plate Opto Sensors will fit into standard or re-model type single gang boxes. There is no restriction as to where you can mount them. As long as there is space to install a single gang box, you can install the Outdoor Wall-Plate Opto Sensors. Opto Sensor is faced away from direct light sources. Reads ambient light with no obstruction or shadows.
|
Electrical Properties: requires a properly sized transformer.
12OB13 Input Voltage rating: regulated 12vdc (11.5-14.0vdc max)
Current Rating: 13.0 amps (20ma-13.2 amps max) |
| 12OB13 12vdc/13 amp Outdoor Wall Plate Sensor |
$83.00ea |
|
|
NOTE - Buyer Beware: Use on/for non LED products or other devices is at the purchaser's own risk. TheLEDLight.Com will not honor any warranty or product defect claim, nor will TheLEDLight.Com be liable to any extent for damages to purchaser's property, equipment, non-LED lighting or other devices. |
Return to Nightwatch LED Controls Page
|
View Cart/Checkout
