Damp Location LED Lights for walls or railings - LED Landscape Lighting
Made in the USA LED landscape Lights with Cree LEDs for Indoor or Outdoor Use, these LED wall lights include a concrete pouring sleeve. Can be used in concrete walls.
Damp Location Wall Lights
Made in the USA LED landscape Lights with Cree LEDs for Indoor or Outdoor Use, these LED wall lights include a concrete pouring sleeve. Can be used in concrete walls.
Cree XPG Series S2 4900K; 160 degree light spread
Light output: 160 lumens (~ 22W incandescent)
Onboard PWM duty 10% extends LED life
Operating voltage: 6 to 24VDC with short circuit protection and reverse polarity protection
Current consumption: 110mA @ 12VDC (1.3 W) - 50mA @ 24VDC (0.6W)
Hole size: 1 3/8" (1.375") x 3" depth minimum.
Operating Temperature: -30C to 60C (-25F to 140F)
Use silicone for outdoor use
RoHS compliant, No Pb, No Hg
Warranty: 2 year Warranty does not cover abuse. See below*
Bezel Diameter: 2.3125" Stem Dia: 1.375"
Depth of fixture: 1.375"; required depth 3-3.5"
Bezel Thickness: 0.370"; Lens opening Dia. 1.375"
Material: VO-94 ABS Plastic with UV inhibitors
Bezel is taupe. Can be painted with paint suitable for plastics to match your decor.
Lens Material: Frosted 0.90" Lexan
IP Rating: IP64 for outdoor use but not for continuous submersion in pools, ponds, fountains or flood plains. Area must be well drained. Not for in ground use.
Pouring Sleeve: 1.63" Dia x 3.5" Long
Maximum Series at 24VDC: 50 fixtures to a home run with 16-14 gauge wire; distance of 240'
Light output: 160 lumens (~ 22W incandescent)
Onboard PWM duty 10% extends LED life
Operating voltage: 6 to 24VDC with short circuit protection and reverse polarity protection
Current consumption: 110mA @ 12VDC (1.3 W) - 50mA @ 24VDC (0.6W)
Hole size: 1 3/8" (1.375") x 3" depth minimum.
Operating Temperature: -30C to 60C (-25F to 140F)
Use silicone for outdoor use
RoHS compliant, No Pb, No Hg
Warranty: 2 year Warranty does not cover abuse. See below*
Bezel Diameter: 2.3125" Stem Dia: 1.375"
Depth of fixture: 1.375"; required depth 3-3.5"
Bezel Thickness: 0.370"; Lens opening Dia. 1.375"
Material: VO-94 ABS Plastic with UV inhibitors
Bezel is taupe. Can be painted with paint suitable for plastics to match your decor.
Lens Material: Frosted 0.90" Lexan
IP Rating: IP64 for outdoor use but not for continuous submersion in pools, ponds, fountains or flood plains. Area must be well drained. Not for in ground use.
Pouring Sleeve: 1.63" Dia x 3.5" Long
Maximum Series at 24VDC: 50 fixtures to a home run with 16-14 gauge wire; distance of 240'