The RGB Color Changing LED Light Stsystem consists of the RGB Programmable Controller, the RGB LED Modules, Interface Boards and Interface Data Board Cables, Data Connector Wires (module to module connectors), the correct sized Power Supply and Power Wires (from the power supply to the modules).

THE RGB Controller unit is able to pre-set 7 static colors (red, blue, green, yellow, cyan, magenta and white) and pre-set 12 modes of operations as listed below. The RGB Controller will also allow the setting of speed changes. One RGB Controller will handle up to 216 RGB LED Modules. You need 9 outlets to power a 216 Module set up as shown on the instruction sheets. There will be 8 power supplies required for 216 RGB Modules, There is 1 adapter included for the RGB Controller.

The complete instruction sheets are here RGB Instruction Sheets, and are to be read and fully understood before purchasing this item. You must be thoroughly knowledgeable and skilled in the use and application of RGB LEDs.

For indoor use. Not water resistant.

The 2.75"L x 1"W x .5" tall RGB LED Modules are made up of 9 red, green and blue 5mm LEDs, 3 per color. They are connected via connecting wires that have PC connectors. Each module will also have a PC Connector for the power supplies that are required for every 27 modules.

The 2.75"L x 1"W x .5" Interface Board will handle up to 108 RGB Modules and is where the 1st of 8 Power Supplies is to be plugged into, and the first RGB Module is connected to. The 108 RGB Module System has one Interface Board.

Other items required to operate the RGB Color Changing Light System are shown below. They are the Interface Board Cable, the Data Connection Wire, the Power Wires (with spade connectors), and the mounting clips.