Acrylic LED PUCKS are made in two types. The Ice Pucks are made with a clear but diffused face for a brighter light source. These have 4 to 112 pieces of 20 degree white, 18,000mcd LEDs, in 2", 2.5" Swivel model, 3" or 4.5" diameter disks. Stocked in white, 12vDC only!
The Frosted Pucks have an opaque diffuser face to soften the light, thus not offering as much light as the Ice Pucks. They range in size from 2", 3" and 4.5" diameter with 4 to 36 pieces of the 40 degree white, 6,000mcd LEDs. Best type as markers, accent lights, or where a soft white light is warranted or wanted.
When installing fixtures, arrays, strips, clusters or any LED product which have a total of 6 or more standard 5mm LEDs, always use a Regulated Transformer, and a dimmer even if you will not use the dimming function. The dimmer contains a PWM/pulse width modulation component which will allow maximum life of the LEDs. See What Is... for the definition of PWM. Both components activate Your Warranty for 1 year. And, if you install more than 6 fixtures with 12 or more LEDs on one circuit, follow this wiring diagram.
This Item Is Being Discontinued! The replacements are the NorthStar http://www.theledlight.store/northstar.html and NorthStar Brites http://www.theledlight.store/northstar_brite.html
SP4L2
-Ice Puck 2" - 4 LED - 2 watt light, 20mA current draw $25.95
ea |
Now in our Bargain
Basement. Click here to go there.
|
SF4L2 - Frosted
Puck 2" - 4 LED - 2 watt light, 20mA current draw $23.00 ea
- |
Now in our Bargain
Basement. Click here to go there.
|
SP6L2
- Ice Puck 2" - 6 LED - 5 watt light, 30mA current draw $36.95
ea |
Now in our Bargain
Basement. Click here to go there.
|
These products require the use of a Transformer. Which size?? Multiply the "Current Draw" from the table above for your color by the number of units to be powered. The result is the total current draw or amperage you will need. Derate your transformer by 20% for safety. Low voltage dimmers are also available. Click here. If you do not purchase a transformer from us to operate this product, we are not able to honor your warranty. |
 |
5" Pucks
Sealed for outdoor use. Low profile, Stem is 3" diameter x 3/4" deep. OD is 5". It easily mounts into interior and exterior walls, in ceilings, walls, roof eaves, in sidewalks or pathways, in 4x4 wood or other type posts.
The Ice Puck uses 36 each, 20 degree, 18,000mcd white LEDs. The Frosted Puck use 36 each, 40° 6000mcd white LEDs. |
SP36L5 -
5" Ice Puck- approx. 40 watt light output 180mA @ 12.0vdc
$209.00 ea |
Now in our Bargain
Basement. Click here to go there.
|
 |
SF36L5
- 5" Frosted Puck -
approx. 25 watt light output
180mA @ 12.0vdc $187.00 ea
|
Now in our Bargain
Basement. Click here to go there.
|
 |
Swivel Ice Pucks
are 2.5" x 7/8" thick; with 24 each, 20°, 18,000mcd white LEDs as standard stocked item. Weather proofed acrylic body, diamond pattern "Ice" diffuser face. Rust-free sandblasted aluminum bracket and lock nuts; center hole for the lead wires and two mounting holes. |
Note: vehicle use requires the purchase of an AU12A2 LED Driver for stable 12.0vdc. |
Applications:
Up-Lighting
Down-Lighting
Spot Lights
Wall Wash Lights
Field Service Lights
RV, Boat, Truck Spotlight |
Available with 24, 32 or 48 LEDs
12.0vdc only - 120mA to 220mA current draw
Clearance items are not Returnable! |
PB32L2,
2.5" Swivel Ice Puck - 32 LEDs -
approx. 30 watt light output 145mA current draw @ 12.0vdc |
$175.00
|
|
PB36L3,
3" Swivel Ice Puck - 36 LEDs - approx.
30 watt light output 180 mA current draw @ 12.0vdc |
$185.00
|
|
  |
Surface Mount Ice Pucks
are 4.5" diameter x 1 1/8" thick; with 20°, 18,000mcd white LEDs as standard stocked item. Weather proofed acrylic body, diamond pattern "Ice" diffuser face. Available in white LED, with or without side rocker on/off switch.
Mounting holes are 9/16" from edge - 3 3/8" center to center between holes. Wire leads exit from center of back or side.
Applications:
Ceiling ; exterior and interior
Wall; exterior and interior
Accent or flood lights with wide angle LEDs Email us
Interior Spot Lights
Truck interior lights -
must also purchase the AU12A2
LED Driver. Power must be regulated 12VDC!
Available with 36, 64 or 112 LEDs12.0vdc only - 180mA to 560mA current draw
Clearance items are not Returnable! |
JW-SP64-SUR-WH
Surface Mount Ice Puck - 64 LED, - approx. 65 watt light output
- 320mA current draw @ 12.0vdc |
$330.00
|
Now
in our Bargain Basement. Click here
to go there. |
JW-SP64-SURSW-WH
Surface Mount Ice Puck - 64 LED, with
Switch - approx. 65 watt light output - 320mA current draw
@ 12.0vdc |
$362.00
|
Now
in our Bargain Basement. Click here
to go there. |
These products require the use of a Transformer. Which size?? Multiply the "Current Draw" from the table above for your color by the number of units to be powered. The result is the total current draw or amperage you will need. Derate your transformer by 20% for safety. Low voltage dimmers are also available. Click here. If you do not purchase a transformer from us to operate this product, we are not able to honor your warranty. |
|