AcryLite LED Strips are u-shaped ribbed acrylic channels which have a slightly frosted clear face and ribbed sides. The LED strip is inserted from the bottom and covered with a plastic plate. The LED does not protrude from the top, thus allowing for improved weatherproofing, wider and smoother light dispersion.

Basically for under-cabinet lighting, for cove lighting, for shelf and cabinet interior lighting, for edge lighting, you can also install the AcryLite LED Strips in boats, planes, semi-tractors, as step lights on decks, in display counters, wherever your imagination takes you.

LEDs are the wide view angle 40-50 Degree 7000mcd white LEDs, with LED spacing at 1/2" apart.

When installing fixtures, arrays, strips, clusters or any LED product which have a total of 6 or more standard 5mm LEDs, always use a Regulated Transformer, and a dimmer even if you will not use the dimming function. The dimmer contains a PWM/pulse width modulation component which will allow maximum life of the LEDs. See What Is... for the definition of PWM. If you install more than 6 fixtures with 12 or more LEDs on one circuit, follow this wiring diagram.