|
72L6 Flush Mount Fixture is 6 inch diameter by 1 /7/8 inch deep ceiling fixture for remodeling and new construction installation. Mounting hole diameter required is 5 inches. The stainless steel spring wings will press onto the mounting material and hold the fixture in place. White trim only.
Excellent fixture for general area lighting as well as kitchen lights - over the sink, over the range, over the cabinets, over the island.
Features:
Approx. 100 watt / 1820 lumen light output
72 ea, 40° 6000mcd white LEDs
Overall trim diameter of 6 inches
480 mA current/4.5 watt consumption @ 12.0vdc
No Lens
72L6 Flush Mount
- 80 watt light output $274.00
complete each and less
This product is obsolete. See the Corona Recessed Light here
|
When installing fixtures, arrays, strips, clusters or any LED product which have a total of 6 or more standard 5mm LEDs, always use a Regulated Transformer, and a dimmer even if you will not use the dimming function. The dimmer contains a PWM/pulse width modulation component which will allow maximum life of the LEDs. See What Is... for the definition of PWM. If you install more than 6 fixtures with 12 or more LEDs on one circuit, follow this wiring diagram.
 This product requires the use of a Transformer. Which size?? Multiply the "Current Draw" from the table above for your color by the number of units to be powered. The result is the total current draw or amperage you will need. Derate your transformer by 20% for safety. Low voltage dimmers are also available. Click here. If you do not purchase a transformer from us to operate this product, we are not able to honor your warranty. |
Return to LED Fixtures
|
View Cart/Checkout
