The LED Light.com
 Serving you online since 1997

Advanced search

The LED Light



RGB Color Changing LED Rope Light


HRL-F4T-108-H1 Flat RGB Rope Light

Properties:
  • Dimensions: 6 feet long x 22mm/.87 inch wide x 11mm/.43 inch thick
  • LEDs: 108 pieces per meter or approx. 33 per foot in 3 strands
  • View Angle: 180 degree light spread
  • Life: 30,000 hours
  • Mounting: clips
  • Rope material: Clear UV stabilized, flexible PVC
  • Resistancy: IP67 Humidity and moisture resistant for indoor/outdoor use
  • Controller: See data sheets
  • Warranty: 1 Year
    		•
    Electrical Specifications:
  • 108 RGB LED pieces per meter or approx. 33 per foot in 3 strands
  • Operates on 24vdc through a 120vac adapter/color controller
  • Consumes 6.6 watts per meter or approx. 2 watts per foot
  • LEDs draw 3volts - 20mA/0.04 watts each
    		•

    Minimum length that you can order is 2 meters/6.56 feet. 2 meters is also the minimum you can cut off to fit the desired length of your installation. CANNOT be cut in less than 2 meter increments!

    Color Control and power is through the HCD-1F4-RL Inline Mini-Controller / Power Supply as shown on the left, with 8 pre-set modes or changes activated by a button control on the Power Suppy Cord. This basic controller will handle 2 meters minimum, up to 24 feet maximum. The modes are chasing, waves, flashing, sequential slow-glow, slow fade, twinkle, flash and static colors.

    We also offer the A-HCD-300-RL Controller for those who require a more robust and adjustable color change control. The A-HCD-300-RL DMX Controller offers 35 plus modes, is expandable and can be coupled to a full dmx512 type control. This model will handle 2 meters/6.6 feet up to a full 100meters/328 feet of RGB Rope Light.

    Required accessories for any length ordered: one 34 inch Inline Mini-Controller/Power Supply cord with standard household plug; one End Cap; six (6) Mounting Clips for every 6 foot length. Example: a 12 foot length will need one Inline Controller, one end cap and 12 Mounting Clips. Joiners are not required unless you have cut off a section in error and need to rejoin the sections. Order your parts below. One HCD-1F4-RL Inline Mini-Controller / Power Supply will handle 24 feet maximum of RGB Rope Light. See all the 4 Wire RGB Rope Light accessories here. There is also a diagram set to show how to make connections. The prongs must meet the wires in the Rope Light or they will not work.

    A HRL-F4T-108-H1 RGB Flat Rope Light $11.00 per foot, or less
    A HCD-1F4-RL Inline Mini-Controller / Power Supply Handles Up To 24 Feet! $19.00 each
    A HAC-RL-F4EC 4 Wire Rope End Cap $0.30 each
    A HAC-RL-F4MC 4 Wire Mounting Clip $0.15 each
    A HAC-RL-F4CC 4 Wire Rope to Rope Coupler $0.80 each
    See all the 4 Wire RGB Rope Light accessories here.


    The A-HCD-300-RLDMX Color Controller is a multi-functional isochronous controller that supports international standard DMX512 control protocol interface. One unit handles upt o 328 feet of RGB Rope Light.

  • Can control up to 3 signal outputs, such as red, green and blue LED light sources
  • Has more than 30 editable RGB color changing patterns, with manual control button
  • Can work with a standard DMX signal generator (DMX console, PC with effects generator software) to create enhanced color and sound change effects
  • Included: HAC-RL-F4PC Power Cord; AC/DC Adapter, HAC-RL-F4PP Power Plug
  • See a larger image of the LL-DM DMX Controller here.
  • Go here for the LL-DM DMX Installation and Operating manual.
    		•

    A-HCD-300-RL DMX Color Controller $299.00 each
    A HAC-RLF4SC DMX Rope Signal Cable $3.60 each
    A HAC-RL-F4SE DMX Signal Extension Cable $3.60 each

    Return to Home/Catalog Page


    View Cart/Checkout Privacy Policy secure shopping for LEDs Contact Info