Feature rich 12 VDC digital RGB ribbon controller allows Digital Chasing RGB Flexible LED Strips to produce hundreds of patterns, color synchronization, sequence, chasing, rolling, cross fading and strobe effects. Made with 3 in 1 5050 RGB SMD LEDs, 24 per meter.
1. Connect the load wire first, followed by the power wire. Please ensure short circuit can not occur between the connecting wires before you turn on the power. It will damage the product. User damage is of course not covered by warranty.
2. There are 8 buttons on controller panel. Each button function as follows:
- ON/OFF button, press to turn on or turn off. When turned off, the LCD will display the current setting segments.
- Play/Pause button, press this button to pause to see the static effects, press again to play.
- Length Adding button, press to set up the number segment, the max is 255 segments
- Length Reducing button, press to set up the number segment, minimum is 3 segments
- Program-up button, press to choose the next program pattern. 83 program patterns total.
- Program-down button, press to choose the previous program pattern.
- Speed-up button, press to increase the color changing speed. 10 speeds total.
- Speed-down button, press to decrease the color changing speed.
3. There are 6 buttons on the remote panel, and each button functions as follows:
- ON / OFF: press to turn on or off.
- MODE: press this button to pause to see the static effects, press again to play.
- B+: press to choose the previous program pattern. 83 program patterns total.
- B-: press to choose the next program pattern.
- S +: press to increase the color changing speed. 10 speed degrades total.
- S-: press to decrease the color changing speed
