| Chasing LED Rope Lights
HRL-R3Cx-36-H1 3 Wire Chasing Light Rope.
Chasing Rope Lights change actions every 3.28 feet/1 meter. Chase means the lights will go on in sequence for every meter powered up. They can have chasing and strobing/flashing at the same time. The chasing part will not flash or strobe until it's scheduled in the sequencing control. See how it would look in this video of light tubes that operate in a similar way - Chasing Lights.
Chasing Rope Lights can have every other meter light up, then change to light up the previously un-lit meters. Chasing Rope Lights also have a static mode where the single color of the Rope will remain lit and un-moving like a standard Rope Light. |
Properties:
Dimensions: 13mm diameter x XX meters/feet long. Can only be cut every one (1) meter, but only after 5 meters, or the Chase effect will be lost !!
LED: 36 each 1000mcd, 3mm LED per meter
View Angle: 180 degree light spread
Voltage: 120vac Power Cable plugs directly into an outlet
Life: 30,000 hours
Mounting: our clips or 2-3 inch sections of 1/2" aluminum channel
Watt Consumed: 3 watts per 1 meter length
Rope material: Clear UV stabilized, flexible PVC
Resistancy: Humidity and moisture resistant for indoor/outdoor use
Warranty: 1 Year |
| A HRL-R3CW-36-H1 White 3 Wire Chasing Light Rope |
$14.95 per meter (6.56 feet = 1 meter) |
|
| A HRL-R3CG-36-H1 Green 3 Wire Chasing Light Rope |
$14.95 per meter (6.56 feet = 1 meter) |
|
| A HAC-RL-R2MC Mounting Clip |
$0.00 each |
|
| A HAC-RL-R2EC End Cap |
$0.00 each |
|
Chase Controllers |
The HCD-500-SRL Chase Controller has one button. This item can handle up to 20 meters of Chasing Rope. It plugs directly into a 120vac outlet.
It controls 8 modes of operation:
1] Combination of all modes - 2] In Waves - 3] Sequential - 4] Slo Glow - 5] Chasing/Flashing - 6] Slow Fade - 7] Twinkle/Flash - 8] Steady on. |
| A HCD-500-SRL Power Cable - Chase Control |
$12.00 each |
|
|
View Cart/Checkout