RGB Mode Chart for RGB Color Changing Wall Washers

Using your RGB Color Changing Wall Washer with the included factory control

Our RGB color changing Wall Washers have 10 preset modes.

Plug the unit into a 120VAC outlet. You do nothing with the connectors when you are using the RGB Color Changing Wall Washer with factory preset controls.

There are two buttons on the back of the unit (described here as A and B from left to right) along with a three digit display.

Press Button A until the letter "P" appears in the first box of the display.

When the "P" stops flashing, press button A again. You are now able to change the value in the second box of the display by pressing button B.

Results:

First Digit	Second Digit	Result
P	1	Solid Red
P	2	Solid Green
P	3	Red and Green
P	4	Solid Blue
P	5	Solid Blue and Red
P	6	Solid Green and Blue
P	7	Solid Red, Green and Blue
P	8	Red, Green and Blue Color Changing
P	9	Red, Green and Blue Color Fading
P	A	Red, Green and Blue Color Flashing

When you have selected the color or pattern you like, it is now time to set your speed.

While the second digit is still flashing, press A again. A numeric value will appear in the third box of the display. Use button "B" to change the speed from 1 at the highest speed to 9 at the lowest speed.

If you need to produce other colors, other shades of a color, or more complex effects, or synchronizing multiple units, you will need to use a DMX 512 color controller. Please email us for more information. It is possible to produce 16,777,216 different colors with special color controlling hardware and software at an additional cost.