Acrylic LED Ice Pucks and Frosted Pucks

These LED pucks were made with 5mm white LEDs, sealed in an acrylic disk for water resistance

Acrylic LED PUCKS are made in two types. The Ice Pucks are made with a clear but diffused face for a brighter light source. These have 4 to 112 pieces of 20 degree white, 18,000mcd LEDs, in 2", 2.5" Swivel model, 3" or 4.5" diameter disks. Stocked in white, 12vDC only!

The Frosted Pucks have a translucent diffuser face to soften the light, thus not offering as much light as the Ice Pucks. They range in size from 2", 3" and 4.5" diameter with 4 to 36 pieces of the 40 degree white, 6,000mcd LEDs. Best type as markers, accent lights, or where a soft white light is warranted or wanted.

Dimensions: The 2" Ice and Frosted Puck is a low profile LED light, easily mounts into a hole and can be glued into place. 1 1/4" Tall. Stem is approx. 1" dia x 1" deep. 12VDC. The 3" Pucks have a 1 3/4" diameter by 1 1/2" tall stem. Overall height is 1 5/8".

	5" Pucks Sealed for outdoor use. Low profile, Stem is 3" diameter x 3/4" deep. OD is 5". It easily mounts into interior and exterior walls, in ceilings, walls, roof eaves, in sidewalks or pathways, in 4x4 wood or other type posts. The Ice Puck uses 36 each, 20 degree, 18,000mcd white LEDs. The Frosted Puck use 36 each, 40 6000mcd white LEDs.
	SP36L5 - 5" Ice Puck- approx. 40 watt light output 180mA @ 12.0vdc
	SF36L5 - 5" Frosted Puck - approx. 25 watt light output 180mA @ 12.0vdc

	Swivel Ice Pucks are 2.5" x 7/8" thick; with 24 each, 20, 18,000mcd white LEDs as standard stocked item. Weather proofed acrylic body, diamond pattern "Ice" diffuser face. Rust-free sandblasted aluminum bracket and lock nuts; center hole for the lead wires and two mounting holes.
	Note: vehicle use requires the purchase of an AU12A2 LED Driver for stable 12.0vdc.
Applications: Up-Lighting Down-Lighting Spot Lights Wall Wash Lights Field Service Lights RV, Boat, Truck Spotlight	Available with 24, 32 or 48 LEDs 12.0vdc only - 120mA to 220mA current draw Clearance items are not Returnable!

Surface Mount Ice Pucks are 4.5" diameter x 1 1/8" thick; with 20, 18,000mcd white LEDs as standard stocked item. Weather proofed acrylic body, diamond pattern "Ice" diffuser face. Available in white LED, with or without side rocker on/off switch. Mounting holes are 9/16" from edge - 3 3/8" center to center between holes. Wire leads exit from center of back or side. Applications: Ceiling ; exterior and interior Wall; exterior and interior Accent or flood lights with wide angle LEDs available Interior Spot Lights Truck interior lights - must also purchase the AU12A2 LED Driver. Power must be regulated 12VDC! Available with 36, 64 or 112 LEDs 12.0vdc only - 180mA to 560mA current draw Clearance items are not Returnable!